Solid Gold Polerouter Consideration and Thoughts

2nastie
Posts
125
Likes
77
Hi fellow members,

Been looking for a decent example of a Genta designed Polerouter for the past 6 months. And more specifically a steel with a black dial. I came across this one (gold one) from a creditable dealer that has my interest.

Would value your thoughts on the watch in terms of originality with the visual parts. From my forum browsing and comparisons with other examples, I'm not sure on the crown and crystal. Crystal is marked UG in the centre, but from my research the original tends to have the square cyclops. Crown is typically "rounder" with more teeth, etc. Is that true?

I appreciate the input on originality of parts as to know more about the watch and my person preference, like many, is to have it as original as possible.

Serial number is 23XXXXX

Cheers!
Edited:
 
IMG_7390.JPG IMG_7391.JPG IMG_7392.JPG IMG_7393.JPG
aap
Posts
3,111
Likes
23,856
Hi! The crown is wrong. It should look like this:
IMG_7048.JPG
 
Gaz6263
Posts
906
Likes
2,305
CanberraOmega CanberraOmega
Damn nice watch though! If you don't buy, can you pass the details to me!
I'll second that. It's a beauty!
 
2nastie
Posts
125
Likes
77
CanberraOmega CanberraOmega
Damn nice watch though! If you don't buy, can you pass the details to me!
Gaz6263 Gaz6263
I'll second that. It's a beauty!
CanberraOmega CanberraOmega
Damn nice watch though! If you don't buy, can you pass the details to me!

Thanks for the input haha. I know right? I'll let you guys know if I don't take it.

Any familiarity with the crystal as I've seen some before without the cyclops.

I assume the crown is not a big deal either. I just don't even have a clue which UG model it would be from...
 
ConElPueblo
Posts
9,596
Likes
27,688
2nastie 2nastie
I assume the crown is not a big deal either. I just don't even have a clue which UG model it would be from...

I am not an UG expert, but I would say it's from a Unisonic.
 
cchen
Posts
587
Likes
1,223
I've not seen Polerouter dates with original crystals that didn't have the square or round cyclops. Could be an early service replacement?
 
gop76
Posts
754
Likes
2,510
cchen cchen
I've not seen Polerouter dates with original crystals that didn't have the square or round cyclops. Could be an early service replacement?

I assume that all Polerouter Date were originally fitted with crystals that had the trapezoidal or the round cyclops but, as i'm not certain, and being the crystal signed, is not a question for me.

It's a nice looking watch
 
Hijak
Posts
7,225
Likes
24,427
IMO the crown and crystal are not a big deal...that is one fine looking watch though!🥰
 
Rumar89
Posts
810
Likes
1,652
I have no particular knowledge of these guys, so this is kind of a side question. Most of these that I've seen have an accent mark above the second E in Geneve. Should someone be concerned if that is missing?

Edited: location of accent mark

IMG_0278.JPG
 
gop76
Posts
754
Likes
2,510
Rumar89 Rumar89
Most of these that I've seen have an accent mark above the second E in Geneve. Should someone be concerned if that is missing?

In one word: no. Both dials, with and without, accent on E are correct
 
Rumar89
Posts
810
Likes
1,652
gop76 gop76
In one word: no. Both dials, with and without, accent on E are correct

Good to know, thanks!
 
MKK35
Posts
15
Likes
0
aap aap
Salut! La couronne a tort. Cela devrait ressembler à ceci :
IMG_7048.JPG
exactement regarder à le logo sur le cadran il devoir allumette cela de le pousseur le U à le fond pointu
 
MKK35
Posts
15
Likes
0
regardez exactement le logo sur le cadran, il doit correspondre à celui du poussoir, le U en bas pointé
 
MKK35
Posts
15
Likes
0
2nastie 2nastie
Salut les membres de l’association,

Je cherchais un exemple décent d’un Polerouter conçu par Genta depuis 6 mois. Et plus précisément un acier avec un cadran noir. Je suis tombé sur celui-ci (en or) d’un marchand digne de ce nom qui m’intéresse.

J’apprécierais vos réflexions sur la montre en termes d’originalité avec les parties visuelles. D’après ma navigation sur le forum et mes comparaisons avec d’autres exemples, je ne suis pas sûr de la couronne et du cristal. Le cristal est marqué UG au centre, mais d’après mes recherches, l’original a tendance à avoir le cyclope carré. La couronne est généralement « plus ronde » avec plus de dents, etc. C’est vrai?

J’apprécie l’apport sur l’originalité des pièces afin d’en savoir plus sur la montre et ma préférence personnelle, comme beaucoup, est de l’avoir aussi originale que possible.

Le numéro de série est 23XXXXX

À votre santé!
le verre est d’origine mon horloger local en vend un sans cyclop imprimé UG produit original
 
gatorcpa
Posts
13,095
Likes
17,950
MKK35 MKK35
look exactly at the logo on the dial, it must correspond to that of the pusher, the U at the bottom pointed

MKK35 MKK35
the glass is original my local watchmaker sells one without cyclops printed UG original product

English please! You information is of very little value if most of the people here cannot understand it.
gatorcpa
 
MKK35
Posts
15
Likes
0
sorry chief, I’m trying to fix this problem because of my translator
 
MKK35
Posts
15
Likes
0
aap aap
Hi! The crown is wrong. It should look like this:
IMG_7048.JPG
Hello, can you give us the size of your crown: length and width, with a slide? I’m looking for one too, thank you
 
gatorcpa
Posts
13,095
Likes
17,950
MKK35 MKK35
sorry chief, I’m trying to fix this problem because of my translator
No problem. I can help you with that. Don't translate the entire page. Highlight what you want to translate and copy it.

Then open up a new window or browser. Go to Google Translate website, paste or type the French into the left window and choose English on the right. Then click the icon at the bottom to copy the translation.

Switch back to this window and paste the translation here.

Now in French:

Pas de problème. Je peux vous aider. Ne traduisez pas la page entière. Sélectionnez ce que vous souhaitez traduire et copiez-le.

Ouvrez ensuite une nouvelle fenêtre ou un nouveau navigateur. Accédez au site web de Google Traduction, collez ou saisissez le texte en français dans la fenêtre de gauche, puis choisissez l'anglais à droite. Cliquez ensuite sur l'icône en bas pour copier la traduction.

Revenez à cette fenêtre et collez la traduction ici.

Hope this helps,
gatorcpa
 
Sign up or log in to reply...