Rattling bezel on my Seiko Turtle 6309-7040

masek
Posts
83
Likes
130
Hi all,

I have this birthyear Seiko Turtle 6309-7040 from 1981 and the bezel is rattling.
It seems to be loose and I am wondering if something is missing or worn out.
Is this a know issue with these watches, and what can I do?

Best regards,
Marius

IMG_2401.webp
 
STANDY
Posts
16,853
Likes
47,844
Could be the spring, or something. (Not sure how this bezel works)

Easy fix if you contact Seiko service centre in your country. Seiko is the one company that will fix something like this without requiring a full service 😉
 
JimInOz
Posts
17,464
Likes
36,610
Bezel probably just needs an O-ring/gasket.
Is the click ball still in place?
 
STANDY
Posts
16,853
Likes
47,844
JimInOz JimInOz
Bezel probably just needs an O-ring/gasket.
Is the click ball still in place?
Wasn’t sure if these had the ball or not… 😉 Good to know they do. Thanks Jim
 
m84
Posts
230
Likes
293
I don't understand what you mean by 'rattling' - can you clarify? The case, however, should have a click ball with a spring (under it) on the top right of the case. Sometimes the ball is gone, or the spring is shot or gone too... You'll need to remove the bezel and inspect.
 
masek
Posts
83
Likes
130
STANDY STANDY
Could be the spring, or something. (Not sure how this bezel works)

Easy fix if you contact Seiko service centre in your country. Seiko is the one company that will fix something like this without requiring a full service 😉
The watchmaker has tried, but they cannot help 😕
 
masek
Posts
83
Likes
130
JimInOz JimInOz
Bezel probably just needs an O-ring/gasket.
Is the click ball still in place?
Might be that it is just a gasket that is missing, but if the click ball or spring is gone - where can I source it?
 
masek
Posts
83
Likes
130
m84 m84
I don't understand what you mean by 'rattling' - can you clarify? The case, however, should have a click ball with a spring (under it) on the top right of the case. Sometimes the ball is gone, or the spring is shot or gone too... You'll need to remove the bezel and inspect.
Well rattling is probably not the right word, but the bezel seems loose. You can hear the aluminum bezel click/rattle whenever the arm is moving. The whole bezel seems loose, but at the same time it is in place and it clicks when it is turned around.
 
STANDY
Posts
16,853
Likes
47,844
masek masek
The watchmaker has tried, but they cannot help 😕
Seiko will have the part and fix this issue.

What country are you in.
 
masek
Posts
83
Likes
130
STANDY STANDY
Seiko will have the part and fix this issue.

What country are you in.
I am located in Norway.
 
STANDY
Posts
16,853
Likes
47,844
Try a Seiko watch mod guy. Just googled and a few in Norway on instagram.

These guys usually can get parts as plenty of places make them. A bezel kit shouldn’t be that hard for this model.

I have a guy in Australia if you can’t find anything local.
 
JimInOz
Posts
17,464
Likes
36,610
Have you checked that the bezel gasket is in place or not?

It's just an O-ring and readily available on eBay.
 
masek
Posts
83
Likes
130
Thank you for the insights, guys. I will get back to you when my watchmaker finally answers me. This has become a headache for him 🤣
 
Sign up or log in to reply...