Cost for letting a watchmaker regulate the timing on a Speedmaster

fredo_omega
Posts
38
Likes
39
My first post here, I've been busy reading so many old posts to be honest, tons of info for Omega owners, wow!

I recently picked up a 1999 Speedy Triple Date, absolutely love the watch, it's in pristine cosmetic condition, literally looks brand new, all functions and pushers operating normally. But, it's running roughly -15spd based on informal daily monitoring, and the WIS in me isn't liking that (even though I think -15 is just barely within original spec limits for the Omega 1151 if I read that correctly).

I've read enough warnings to not want to try and open the watch myself to regulate the timing--though I've done so before on inexpensive watches like a Seiko 5. So my question: how much would a watchmaker, Omega tech or otherwise, charge for doing the regulation? I really don't want to spring for a full overhaul charge with an Omega certified tech, though I will if necessary. Advice?
 
fiberguy
Posts
781
Likes
2,109
It is a 20+ year old watch. If its never been serviced, its long past due and it would be money well spent. As far as what someone is charging to regulate, cant help much there.
 
Dan S
Posts
23,127
Likes
51,629
Everyone is different. Ask your watchmaker. 馃憤
 
gbesq
Posts
9,481
Likes
51,945
Would you buy a used car that was pristine on the outside if you had no idea how the engine had been previously cared for, there were no service records, and it was running roughly - and you decided to just have the timing sequence adjusted without looking at anything else? Get it serviced.
 
fredo_omega
Posts
38
Likes
39
OK, how about a related question: Omega tech, or any trusted watchmaker? I believe Omega has a pretty much stock Valjoux chronograph movement in this watch, which is part of its appeal as a used timepiece. So a competent watchmaker has likely worked on a movement like this hundreds of times over the years, no? There is an actual Omega service center at the larger of the two Omega ADs in this town, but I've never worked with them before.
 
Dan S
Posts
23,127
Likes
51,629
I would be a bit surprised if any reputable watchmaker, Omega certified or not, would be willing to do piecemeal work on a 20+ year-old unserviced watch, especially for a stranger walking in off the street. In all likelihood, they make some adjustments, and then the timekeeping continues to degrade because the watch needs a service, and then you come back and complain.
 
fredo_omega
Posts
38
Likes
39
I love the watch so I'll spring for the service, just need to save some pennies to pay for it.
 
gbesq
Posts
9,481
Likes
51,945
You don鈥檛 need to go to Omega. There are many good independents with Omega training and Omega parts accounts. Many will accept, service and return your watch via mail. Just make sure that it is properly packaged and insured.
 
Deafboy
Posts
2,399
Likes
6,935
I make it a personal policy to service a vintage watch in my collection before wearing it for the first time. Most collectors do not do that unfortunately.

Bonus: Watch the Day is a 1952 Bulova Air King

upload_2023-5-17_14-34-4.jpeg
Edited:
 
watchyouwant
Posts
5,541
Likes
9,368
Even if you need parts, every Watchmaker can service that Valjoux based movement. Might be around $600.
 
Syrte
Posts
7,630
Likes
21,886
The cost is completely dependent on what region of what country the OP is in.
 
fredo_omega
Posts
38
Likes
39
Thanks all, I'll make some calls and see where I'm at. I'll try the Omega AD first.
 
Archer
Posts
29,111
Likes
75,238
fredo_omega fredo_omega
OK, how about a related question: Omega tech, or any trusted watchmaker? I believe Omega has a pretty much stock Valjoux chronograph movement in this watch, which is part of its appeal as a used timepiece. So a competent watchmaker has likely worked on a movement like this hundreds of times over the years, no? There is an actual Omega service center at the larger of the two Omega ADs in this town, but I've never worked with them before.

It's not a "stock" 7750. There are differences that in some cases, will require specific Omega parts to replace worn parts - the biggest one is the rotor bearing...completely different set-up to the standard 7750, and a common wear part.
 
DomB
Posts
66
Likes
347
Archer Archer
It's not a "stock" 7750. There are differences that in some cases, will require specific Omega parts to replace worn parts - the biggest one is the rotor bearing...completely different set-up to the standard 7750, and a common wear part.
Good to know! Thanks, Archer.
 
fredo_omega
Posts
38
Likes
39
FYI--Omega has apparently upped their prices on servicing as well. Omega site lists standard service on chronograph movements at $900. I got an estimate from a well-known independent in Seattle and their quote was the same--$900. Seems high given I was charged $750 from an RSC on two different Rolex models (which I paid). Thing is, those were $8K watches. $900 on a $2200 watch is a tough pill to swallow...
 
JimInOz
Posts
17,465
Likes
36,611
fredo_omega fredo_omega
FYI--.......... Thing is, those were $8K watches. $900 on a $2200 watch is a tough pill to swallow...

The amount of effort and time required to service/administrate would not differ much between your Rolexes and an Omega.

Basing service costs on the value of the watch doesn't meet the pub test.
 
Evitzee
Posts
7,518
Likes
13,893
fredo_omega fredo_omega
FYI--Omega has apparently upped their prices on servicing as well. Omega site lists standard service on chronograph movements at $900. I got an estimate from a well-known independent in Seattle and their quote was the same--$900. Seems high given I was charged $750 from an RSC on two different Rolex models (which I paid). Thing is, those were $8K watches. $900 on a $2200 watch is a tough pill to swallow...
Assuming you contacted Nesbit's in Seattle their pricing will be the same as Omega's in my experience. The big advantage with them is they will be sympathetic to your requests for any case refinishing, saving dial and hands, etc.
 
KanakaTurks
Posts
84
Likes
242
fredo_omega fredo_omega
FYI--Omega has apparently upped their prices on servicing as well. Omega site lists standard service on chronograph movements at $900. I got an estimate from a well-known independent in Seattle and their quote was the same--$900. Seems high given I was charged $750 from an RSC on two different Rolex models (which I paid). Thing is, those were $8K watches. $900 on a $2200 watch is a tough pill to swallow...

Lots of ADs sell preowned watches that are already serviced and come with a one or two year warranty. You bought cheap and now need to service it. All part of the game IMO. Enjoy your new watch!
 
fredo_omega
Posts
38
Likes
39
KanakaTurks kimo.lee
Lots of ADs sell preowned watches that are already serviced and come with a one or two year warranty. You bought cheap and now need to service it. All part of the game IMO. Enjoy your new watch!

Oh, I agree, I couldn't find the watch in this kind of cosmetic condition anywhere else than where I bought it, so I dove in knowing this might be the needed outcome. I was just crossing my fingers the service cost would be more manageable given my experience with Rolex. But yes, I totally love the watch!
 
speedy.jpg
6 More Posts...
Sign up or log in to reply...