Aqua Terra 2512.3000 mesh problem! Plz help

MacRulez4Ever
Posts
666
Likes
485
I just bought à AT ref 2512.3000
And i got my lug size to 21mm.

My plan was to get à omega original mesh bracelet. But they are only in 16,18,20,22,24 mm. Thats make 20 to small and 22 Will not fit ;( any ideas. Or maby there are som special end links to
put on the 20mm mesh to make it 21 ?
 
Steve
Posts
899
Likes
138
I'd go with the 20mm. You wouldn't really notice the 1mm gap. But having said that i'd re-measure the lugs to make sure. 21mm seems a bit of a odd size ??.
 
dsio
Posts
33,162
Likes
37,894
Fit the 22mm, little known fact about the Omega mesh, the endlinks being a row of flexible loops can bend in with very little effort, you'll get that 1mm of room rather easily.
 
MacRulez4Ever
Posts
666
Likes
485
Steve Steve
I'd go with the 20mm. You wouldn't really notice the 1mm gap. But having said that i'd re-measure the lugs to make sure. 21mm seems a bit of a odd size ??.

I know that the measure is right , smallest size has 19mm lug, medium has 20mm and full size has 21. Thats sick to make lug size thats uneven, but that is the size of old omega Aqua terra models ;(
 
MacRulez4Ever
Posts
666
Likes
485
dsio dsio
Fit the 22mm, little known fact about the Omega mesh, the endlinks being a row of flexible loops can bend in with very little effort, you'll get that 1mm of room rather easily.

Ok Nice ! I hope that you are Shure aboute this, because i Will order à 22 mesh bracelet then and squize it à bit 😉
 
dsio
Posts
33,162
Likes
37,894
MacRulez4Ever MacRulez4Ever
Ok Nice ! I hope that you are Shure aboute this, because i Will order à 22 mesh bracelet then and squize it à bit 😉
It will be tight, but you can do it.
 
MacRulez4Ever
Posts
666
Likes
485
Np i'm strong. But i have to check one last thing. I have small wrists. And must know what the narrowest lenght is on à 22 mm mesh is. Because it Seems that the mesh only could be adjust at the employment. Its not like an ordinary bracelet that you can remove pieaces
 
dsio
Posts
33,162
Likes
37,894
MacRulez4Ever MacRulez4Ever
Np i'm strong. But i have to check one last thing. I have small wrists. And must know what the narrowest lenght is on à 22 mm mesh is. Because it Seems that the mesh only could be adjust at the employment. Its not like an ordinary bracelet that you can remove pieaces
It can be adjusted to fit a mouse if needed, because the mesh rows are all the same, you can actually cut off excess rows as much as you like, best done by a professional, but not that hard.
 
MacRulez4Ever
Posts
666
Likes
485
I took the 22 , and pushed the ends à bit
Perfect ! 😉

6d3a90da-264b-6087.jpg

6d3a90da-265c-91cf.jpg
 
dsio
Posts
33,162
Likes
37,894
Looks great, those vintage mesh bracelets are seriously comfy, how's the length?
 
Sign up or log in to reply...